 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HCP Series * Solid Aluminium Electrolytic Capacitor with Conductive Polymer * Ultra low ESR * High Ripple Current * Switchmode Power Supplies, Computer, DC/DC Converter * Noise Suppression in Smoothing / High-Frequency Circuits lower ESR miniaturized CD 284 XY HCP HPM Item Operating Temperature Range (C) Voltage Range (V) Capacitance Range (F) Capacitance Tolerance (20C, 120Hz) Surge Voltage Leakage Current (A) Dissipation Factor (20C, 120Hz) Equivalent Series Resistance (20C, 100kHz) Temperature Characteristics Characteristics -55 ~ +105 4 ~ 16 68 ~ 1 200 20% Rated Voltage x 1,15 The initial specified value or less (20C, 2min) The initial specified value or less The initial specified value or less Z (+105C) / Z (+20C) 0,75 Stability at 100kHz Z Z (-55C) / Z (+20C) 1,25 Stability at 100kHz 2 000h, Rated voltage applied at 105C Capacitance change : within 20% of the initial measured value Dissipation Factor Tan : 150% of initial specified value ESR : 150% of initial specified value DC Leakage Current : the initial specified value 1 000h, Rated Voltage applied at 60C, 90~95% RH Capacitance change : within 20% of the initial measured value Dissipation Factor Tan : 150% of initial specified value ESR : 150% of initial specified value DC Leakage Current : the initial specified value 1 000 cycles at 105C, with UDC = 1,15 UR ( 30sec load / 330sec discharge) Capacitance change : within 20% of the initial measured value Dissipation Factor Tan : 150% of initial specified value ESR : 150% of initial specified value DC Leakage Current : the initial specified value Load Life Moisture Resistance Surge Voltage Characteristics Typical Curves Frequency characteristics of Impedance and ESR Z, ESR (mOhm) Z, ESR (mOhm) 10 000 Frequency characteristics of Impedance and ESR 10 000 1000 1 000 Polymer 100 100 10 10 1 0.1 1 10 100 1 000 1 0.1 1 10 100 1 000 ESR Z HCP 470F 6,3V Frequency (kHz) ESR Z HCP 820F 4V Frequency (kHz) Capacity Drift: Polymer Capacitor versus Standard Electrolytic Capacitor ESR Drift: Polymer Capacitor versus Standard Electrolytic Capacitor Capacity ESR (Ohm) 600F 500F 400F 300F 200F 100F 0F -55C -40C -25C 0C 20C 40C 80C 105C 70 60 50 40 30 20 10 0 -10 - 55C - 40C -25C 0C 20C 40C 80C 105C HCP 10V 470F Standard 25V 470F Temperature HCP 10V 470F Standard 25V 470F Temperature 80 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 HCP Series Ratings for HCP Series VDC Code Rated Capacitance Max ESR 20C, 100kHz Max Ripple Current 105C, 100kHz (mArms) 4 080 4 080 4 260 4 840 5 040 5 040 5 040 5 040 2 780 3 000 3 500 3 810 3 810 4 330 4 840 5 040 2 670 3 020 3 370 4 140 4 510 4 510 2 700 2 740 3 260 5 050 Dissipation Factor 20C, 120Hz 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,15 0,07 0,07 0,08 0,08 0,08 0,08 0,08 0,15 0,07 0,07 0,07 0,08 0,08 0,08 0,06 0,06 0,06 0,06 Leakage Current Size O DxL (mm) 8 x 11,5 8 x 11,5 8 x 11,5 10 x 12,5 10 x 12,5 10 x 12,5 10 x 12,5 10 x 12,5 8 x 11,5 8 x 11,5 8 x 11,5 8 x 11,5 8 x 11,5 10 x 12,5 10 x 12,5 10 x 12,5 8 x 11,5 10 x 12,5 10 x 12,5 10 x 12,5 10 x 12,5 10 x 12,5 8 x 11,5 8 x 11,5 10 x 12,5 10 x 12,5 (V) (F) 510 560 620 (m) 16 14 13 13 12 12 12 12 30 30 25 16 16 14 13 12 30 29 27 21 18 15 36 30 28 14 (A) 410 450 500 550 600 655 800 960 190 280 415 490 595 705 860 1 035 200 300 440 660 780 940 220 320 480 1 056 4 0G 680 750 820 1 000 1 200 150 220 330 6,3 0J 390 470 560 680 820 100 150 10 1A 220 330 390 470 68 16 1C 100 150 330 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 81 Polymer Part Number System Order Code SMD, Radial, Snap-In EC Technology EC = Electrolytic Capacitor PC = Polymer Capacitor R Terminal Type SMD Radial =V =R 1C Rated Voltage Code For coding please refer to the pages of ratings PT Series Code CD VS CD VH CD VZ CD 261 CD 262 CD 26 CD 269 CD 281 CD 28 CD 287 CD 28L CD 29 CD 29 CD 29 CD 296 CD 297 CD 299 101 Capacitance Code (in F) 1,0 = 010 100 = 101 1 000 = 102 M Capacitance Tolerance = M SMD: =K Taped FF Lead Form 2 Terminal/ Pitch Size = FF 0611 Dimension 4x7 = 0407 = 0511 = 3580 JE xxxxx for Specials only = BS = VH = VZ = LK 0,47 = R47 20% 10% Terminal = T2 2,0mm 2,5mm 3,5mm 5,0mm 7,5mm = 20 = 25 = 35 = 50 = 75 5x11,5 35x80 Snap-In = S 2,2 = 2R2 +30 / -10% = Q +50 / -10% = T Radial: Long Lead = LL 6,3x11,5 = 0611 = CB = CC CD 261X = QX Cut 5,0mm Cut ,mm 45x100 = 45100 = QM 10 000 = 103 = BK = PH = LL = XY = GC = QL = BZ = BW = BC = KC = BB = PG Cut 4,0mm Cut 3,5mm Cut 3,0mm = CD = CE = CF 10,0mm = 10 12,5mm = 12 on request: alternative lead forms (axial, 90 - angle, others) Snap-In: 4,0mm Pin Length Soldering Pin preferred = T4 = S4 2 Pin 3 Pin 4 Pin 5 Pin = P2 = P3 = P4 = P5 6,mm Pin Length = T6 CD 29D = HR CD 29H = QH CD 29L HCP HPM HVC = QL = CP = PM = VC Technical Specification SMD Type Dimensions O DxL x , x , 6, x, 6,x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 A B C E L W 1,8 4,3 4,3 1,0 5,4 2,1 5,3 5,3 1,3 5,4 2,4 6,6 6,6 2,2 5,4 2,5 6,6 6,6 2,2 7,7 2,9 8,3 8,3 3,1 10,5 2,9 8,4 8,4 3,1 11,8 3,2 10,3 10,3 4,5 10,5 3,2 10,4 10,4 4,5 12,7 in mm 0,5 - 0,8 0,7 - 1,1 Taping Dimensions Size (DxL) w 0, A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 7,7 8 x 10,5 8 x 11,8 10 x 10,5 10 x 12,7 12,0 12,0 16,0 16,0 24,0 24,0 24,0 24,0 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 8,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 5,8 5,8 5,8 8,4 11,0 12,3 11,0 14,0 5,5 5,5 7,5 7,5 11,5 11,5 11,5 11,5 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 6,3 8; 10 Polymer 14 1 18 1 25 1 25 1 50 1 50 1 50 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. v2006.2 8 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L OD F L7 L 11 3 1 4 1,5 5 2,0 1,0 6,3 2,5 0,45 8 3,5 5 2,0 6,3 2,5 0,5 8 3,5 10 12,5 16 5,0 0,6 2,0 7,5 0,8 18 20 22 1,0 25 12,5 10,0 O d 0,4 aMax in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range OD 4~6 Dimensions F 0,5 2,5 P 0,1 12,7 A 8 13 18,5 3,5 12,7 Form L (max) H 0,75 Ho 0,5 13 18,5 - Ammopack Form A 4~8 7 17,5 Form B FF 5 ~ 6,3 13 18,5 16 12,7 B 8 22 20,0 5 10 22 18,5 A Form C 12,5 27 18,5 - 15,0 FD 12,5 27 18,5 - 25,4 C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code I preferred CB 5,0 0,5 CC 4,5 0,5 CD 4,0 0,5 CE 3,5 0,5 CF 3,0 0,5 in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 9 |
Price & Availability of HCP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |